Feather RP2040

Vendor: Adafruit
Features: Battery Charging, Breadboard Friendly, Feather, RGB LED, SPI Flash, STEMMA QT/QWIIC, USB-C
Source on GitHub: ADAFRUIT_FEATHER_RP2040
More info: Website

Installation instructions

Flashing via UF2 bootloader

To get the board in bootloader mode ready for the firmware update, execute machine.bootloader() at the MicroPython REPL. Alternatively, hold down the BOOTSEL button while plugging the board into USB. The uf2 file below should then be copied to the USB mass storage device that appears. Once programming of the new firmware is complete the device will automatically reset and be ready for use.


Nightly builds

v1.17-212-g23a150789 (2021-11-30) .uf2
v1.17-207-g97a7cc243 (2021-11-29) .uf2
v1.17-205-gde8dc4bad (2021-11-26) .uf2
v1.17-202-ge99f7b6d2 (2021-11-25) .uf2