GARATRONIC_NADHAT_F405

Vendor: McHobby
Source on GitHub: stm32/GARATRONIC_NADHAT_F405
More info: Website

Installation instructions

STM32 via ST-Link

Nucleo and Discovery boards typically include a built-in ST-Link programmer.

A .bin or .hex file can be flashed using st-flash.

# Optional erase to clear existing filesystem.
st-flash erase

# Flash .bin
st-flash write firmware.bin 0x08000000
# or, flash .hex
st-flash --format ihex write firmware.hex

A .hex file can be flashed using STM32 Cube Programmer.

STM32_Programmer.sh -c port=SWD -d firmware.hex -hardRst

STM32 via DFU

Boards with USB support can also be programmed via the ST DFU bootloader, using e.g. dfu-util or pydfu.py.

To enter the bootloader the BOOT0 pin can be connected to VCC during reset, or you can use machine.bootloader() from the MicroPython REPL.

dfu-util --alt 0 -D firmware.dfu

Firmware

Releases

v1.19.1 (2022-06-18) .dfu [.hex] [Release notes] (latest)
v1.18 (2022-01-17) .dfu [.hex] [Release notes]

Nightly builds

v1.19.1-724-gfb7d21153 (2022-12-01) .dfu [.hex]
v1.19.1-723-g771c16f3d (2022-11-30) .dfu [.hex]
v1.19.1-722-g1b774b373 (2022-11-29) .dfu [.hex]
v1.19.1-721-gd5181034f (2022-11-28) .dfu [.hex]