QT Py - SAMD21

Installation instructions

For deploying the MicroPython firmware to the SAMD module, follow the procedure:

• Push the reset button twice or call machine.bootloader(). A drive icon should appear representing a virtual drive.

• Copy the .uf2 file with the required firmware to that drive.

As soon as the drive disappears, the firmware is loaded and started.

Firmware

Preview builds

(These are automatic builds of the development branch for the next release)

Firmware (Support for an external Flash chip)

No releases are available for this board.

Preview builds

(These are automatic builds of the development branch for the next release)